LK型可抽式立式長軸泵(长轴液下泵)-强伦人妻一区二区三区久久精品国产AV一区二区三区亚洲AV成人一区二区三区在线观看

 LK型可抽式立式長軸泵

Vertical Mixed Flow Pump

LK型转子可抽式立式長軸泵産品概述

LK型可抽式立式長軸泵適用于電廠、鋼廠、自來水公司、汙水處理廠、石油化工、礦山等工礦企業亚洲一区精品在线成人啪啪色婷婷久 受不了，以及市政給排水工程、農業灌溉、防洪排澇等工程亚洲一区精品在线。可以用來輸送55℃以下的清水、雨水、鐵皮坑水、汙水以及海水等介質亚洲精品一区二区三区在线精品国内自产拍在线观看视频免费看成人A片无码网站，流量範圍30-70000m3/h精品老司机在线观看视频精品国内自产拍在线观看视频，揚程範圍7-200m欧美一级在线观看精品老司机在线观看视频少妇高潮灌满白浆毛片免费看。特殊設計的輸送介質溫度可達90℃精品人妻久久久久久久。

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55⁰C and reaches to 90⁰C for special design. The flow rate ranges from 30 to 20000m³/h and the head—from 7 to 200m.

 

LK型可抽式立式長軸泵産品特點

1、 運行平穩欧美一级在线观看免费看成人A片无码网站，安全可靠波多野结衣高清无码中文456，免抽真空啓動精品老司机在线观看视频欧美一级在线观看，使用壽命周期長亚洲精品一区二区三区在线精品国内自产拍在线观看视频成人啪啪色婷婷久 受不了。

2、 泵體積小亚洲精品一区二区三区在线免费看成人A片无码网站，基礎占地面積少欧美一级在线观看，基礎以下泵長度可以調整精品国内自产拍在线观看视频精品老司机在线观看视频免费看成人A片无码网站，適應性強亚洲一区精品在线亚洲精品一区二区三区在线。

3、 流道簡單可靠少妇高潮灌满白浆毛片免费看，節省泵房基建投資精品人妻久久久久久久亚洲精品一区二区三区在线。

4、 結構合理亚洲精品一区二区三区在线，裝拆方便亚洲精品一区二区三区在线，維護檢修容易簡便亚洲精品一区二区三区在线。

5、 泵效率高精品人妻久久久久久久精品国内自产拍在线观看视频亚洲精品一区二区三区在线，降低運行成本精品老司机在线观看视频精品人妻久久久久久久。

Features

1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.

3. Flowing channel simple and reliable,saving the investment for construction of the pump house.

4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5. Efficiency high, operating cost reduced.

 

LK型可抽式立式長軸泵型號說明

1400LK—30Ⅰ	500LB—55.3Ⅰ(×2、3)
1400——泵吐出口徑1400mm	500——泵吐出口徑500mm
L———立式長軸泵	L———立式長軸泵
K———轉子可抽芯	B———轉子不可抽芯
30———泵的設計揚程	55.3———泵的設計揚程
Ⅰ———泵設計順序（第一次設計無標示）	Ⅰ———泵設計順序（第一次設計無標示）
注：對于大口徑泵亚洲精品一区二区三区在线，一般不設計多級形式	×2———表示泵的級數爲2級

 

1400LK-30Ⅰ                                 500LB-55.3Ⅰ(×2、3)

 

1400—Outlet of the pump:1400mm              500—Outlet of the pump:500mm

L----Vertical mixed flow pump               L---Vertical mixed flow pump

K----Pull-out rotor                         B---Non pull-out rotor

30---Design head                            55.3---Design head

Ⅰ---Pump design class(no mark when         Ⅰ---Pump design class(no mark when

first time design)                         first time design)

Remarks: multistage type is usually         ×2-- Stage number

Not designed for the pump of large

nozzle diameter.

 

産品結構說明

简图一. LK型立式長軸泵结构简图(型式ST)

简图二. LK型立式長軸泵结构简图(型式XD)

1、 LK型可抽式立式長軸泵为立式单级（多级）离心式或斜流式带导叶体结构少妇高潮灌满白浆毛片免费看。

2、 泵的結構型式有泵吐出口在安裝基礎之上和之下(型式代號分別爲S和X)、泵承受軸向力和電機承受軸向力(型式代號分別爲T和D)、外接潤滑水和泵自身潤滑等形式免费看成人A片无码网站。

3、 泵安裝型式有濕坑式安裝或幹坑式安裝少妇高潮灌满白浆毛片免费看欧美一级在线观看免费看成人A片无码网站。

濕坑式安裝：泵下部浸沒在吸水池中欧美一级在线观看少妇高潮灌满白浆毛片免费看。

幹坑式安裝：泵采用管道進水亚洲一区精品在线少妇高潮灌满白浆毛片免费看，泵吸入喇叭口與進水管道之間采用90°肘形進水彎管聯接欧美一级在线观看。

4、 泵軸承爲橡膠導軸承或賽龍導軸承免费看成人A片无码网站欧美一级在线观看精品国内自产拍在线观看视频。

5、 泵口径在1000mm以下时精品人妻久久久久久久精品老司机在线观看视频精品国内自产拍在线观看视频，泵转子一般为不可抽形式；泵轴向水推力及转子重量一般由泵本体推力轴承承受亚洲精品一区二区三区在线，泵和电机之间采用弹性联接；泵吐出口位于安装面基础之上（型式代号为ST的结构形式）欧美一级在线观看精品人妻久久久久久久亚洲精品一区二区三区在线。如有要求波多野结衣高清无码中文456，也可以由电机承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为SD、XT、XD）;用户如有要求精品老司机在线观看视频， 也可以设计成可抽式结构形式亚洲一区精品在线。泵口径在1000mm以上时免费看成人A片无码网站精品老司机在线观看视频成人啪啪色婷婷久 受不了，泵转子一般为可抽形式；泵轴向水推力及转子重量一般由电机推力轴承承受精品人妻久久久久久久波多野结衣高清无码中文456精品老司机在线观看视频，泵和电机之间采用刚性联接；泵吐出口位于安装面基础之下（型式代号为XD）精品老司机在线观看视频精品人妻久久久久久久。如有要求少妇高潮灌满白浆毛片免费看，也可以由泵承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为XT、SD、ST）精品人妻久久久久久久。用户如有要求亚洲一区精品在线欧美一级在线观看， 也可以设计成不可抽式结构形式精品人妻久久久久久久。

6、 泵本體承受軸向水推力及轉子重量時亚洲精品一区二区三区在线欧美一级在线观看，泵推力軸承采用稀油潤滑少妇高潮灌满白浆毛片免费看亚洲一区精品在线成人啪啪色婷婷久 受不了，推力軸承部件帶Pt100測溫元件測軸承溫度或壓力式溫度計測潤滑油溫度亚洲精品一区二区三区在线成人啪啪色婷婷久 受不了精品老司机在线观看视频。

7、 泵軸向密封采用填料密封欧美一级在线观看成人啪啪色婷婷久 受不了。

8、 在泵安裝基礎上可以進行葉輪與葉輪室（轉動部分與靜止部分）之間間隙的調整成人啪啪色婷婷久 受不了波多野结衣高清无码中文456，操作方便免费看成人A片无码网站。

9、 從吐出方向往泵看少妇高潮灌满白浆毛片免费看精品国内自产拍在线观看视频，電機接線盒與泵外接潤滑水接管位于左側精品人妻久久久久久久。也可根據用戶要求波多野结衣高清无码中文456，布置在其它方位亚洲精品一区二区三区在线免费看成人A片无码网站。

Structure feature:

1.   Series LK ,LB pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.

2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.   The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pump inundated in the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 90⁰.

4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.

5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  

6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.   The packing seal is adopted for the axial seal of the pump.

9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.

LK型可抽式立式長軸泵産品主要零部件材質Materials Of Major Parts

介質 Media 零件 Parts	清水 Clear water	海水 Seawater	汙水（含磨料） Sewage（incl.of abrasiv powder）
吐出彎管 Discharge elbow 中間接管（外、內） Intermediate column  (internal & external)	Q235-A	HT200Ni2Cr 0Cr18Ni9 ZG0Cr18Ni12Mo2	Q235-A
導葉、吸入喇叭口 Guide vane, Suction bellmouth	HT200	HT200Ni2Cr ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	HT200、QT500-7 ZG1Cr13Ni1
葉輪 Impeller	ZG1Cr13Ni1 HT200	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	QT500-7 ZG1Cr13Ni1
葉輪室、密封环 Shroud,wearing ring	HT200 ZG2Cr13	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	ZG1Cr13Ni1 QT500-7
主軸 Main shaft	45、2Cr13	2Cr13、0Cr18Ni9 0Cr18Ni12Mo2	45、2Cr13 1Cr18Ni9
軸套 Shaft sleeve	45,2Cr13	2Cr13、0Cr18Ni9 ZG0Cr18Ni12Mo2	2Cr13、1Cr18Ni9
導軸承 Guide bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing

注：根据用户具体使用要求精品人妻久久久久久久波多野结衣高清无码中文456亚洲一区精品在线，可另选其它适合材质波多野结衣高清无码中文456精品老司机在线观看视频。铸铁材质葉輪只适用于闭式葉輪少妇高潮灌满白浆毛片免费看。

Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.

LK型可抽式立式長軸泵型谱图

LK型長軸泵外形尺寸圖(基本型式XD)