LK型可抽式立式長軸渦輪泵-漂亮的丰满人妻中文字幕嘟嘟嘟在线视频免费观看国产精品系列在线一区

 LK型可抽式立式長軸渦輪泵

概述

LK型可抽式立式長軸渦輪泵适用于电厂、钢厂、自来水公司、污水处理厂、石油化工、矿山等工矿企业精品一本道无码一区，以及市政给排水工程、农业灌溉、防洪排涝等工程精品一本道无码一区熟妇a淫久久婷婷久久无码欧美人妻。LK型可抽式立式長軸渦輪泵可以用来输送55℃以下的清水、雨水、铁皮坑水、污水以及海水等介质婷婷久久无码欧美人妻国产亚洲精品AV片在线观看播放，流量范围30-70000m³/h成人作爱视频，扬程范围7-200m日本一道一本国产亚洲精品AV片在线观看播放。特殊设计的LK型可抽式立式長軸透平泵输送介质温度可达90℃日韩欧美一区二区三区免费观看。

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55⁰C and reaches to 90⁰C for special design. The flow rate ranges from 30 to 20000m³/h and the head—from 7 to 200m.

 

LK型可抽式立式長軸渦輪泵産品特點

1、 運行平穩婷婷久久无码欧美人妻，安全可靠日本一道一本国产亚洲精品AV片在线观看播放，免抽真空啓動最受欢迎无码av排行榜，使用壽命周期長在线观看国产囯内视频日韩欧美一区二区三区免费观看熟妇a淫久久。

2、 泵體積小婷婷久久无码欧美人妻日本一道一本，基礎占地面積少少妇大叫又粗又大太爽A片，基礎以下泵長度可以調整少妇大叫又粗又大太爽A片国产亚洲精品AV片在线观看播放最受欢迎无码av排行榜，適應性強熟妇a淫久久少妇大叫又粗又大太爽A片。

3、 流道簡單可靠日韩欧美一区二区三区免费观看日本一道一本婷婷久久无码欧美人妻，節省泵房基建投資国产亚洲精品AV片在线观看播放日韩欧美一区二区三区免费观看婷婷久久无码欧美人妻。

4、 結構合理日韩欧美一区二区三区免费观看，裝拆方便日韩欧美一区二区三区免费观看日本一道一本国产亚洲精品AV片在线观看播放，維護檢修容易簡便日韩欧美一区二区三区免费观看。

5、 泵效率高在线观看国产囯内视频婷婷久久无码欧美人妻，降低運行成本最受欢迎无码av排行榜熟妇a淫久久。

Features

1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.

3. Flowing channel simple and reliable,saving the investment for construction of the pump house.

4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5. Efficiency high, operating cost reduced.

 

LK型可抽式立式長軸渦輪泵型號說明

1400LK—30Ⅰ
1400——泵吐出口徑1400mm
L———立式長軸透平泵
K———轉子可抽芯
30———泵的設計揚程
Ⅰ———泵設計順序（第一次設計無標示）
注：對于大口徑泵婷婷久久无码欧美人妻，一般不設計多級形式

 

1400LK-30Ⅰ                                 

 

1400—Outlet of the pump:1400mm              

L----Vertical mixed flow pump               

K----Pull-out rotor                         

30---Design head                            

Ⅰ---Pump design class(no mark when         

first time design)                         

Remarks: multistage type is usually         

Not designed for the pump of large

nozzle diameter.

 

産品結構說明

简图一. LK型立式长轴渦輪泵结构简图(型式ST)

简图二. LK型立式长轴渦輪泵结构简图(型式XD)

1、 LK型可抽式立式長軸渦輪泵为立式单级（多级）离心式或斜流式带导叶体结构最受欢迎无码av排行榜。

2、 泵的結構型式有泵吐出口在安裝基礎之上和之下(型式代號分別爲S和X)、泵承受軸向力和電機承受軸向力(型式代號分別爲T和D)、外接潤滑水和泵自身潤滑等形式婷婷久久无码欧美人妻在线观看国产囯内视频。

3、 泵安裝型式有濕坑式安裝或幹坑式安裝精品一本道无码一区。

濕坑式安裝：泵下部浸沒在吸水池中熟妇a淫久久少妇大叫又粗又大太爽A片。

幹坑式安裝：泵采用管道進水日本一道一本在线观看国产囯内视频，泵吸入喇叭口與進水管道之間采用90°肘形進水彎管聯接日韩欧美一区二区三区免费观看日本一道一本。

4、 泵軸承爲橡膠導軸承或賽龍導軸承日本一道一本婷婷久久无码欧美人妻日韩欧美一区二区三区免费观看。

5、 泵口径在1000mm以下时成人作爱视频，泵转子一般为不可抽形式；泵轴向水推力及转子重量一般由泵本体推力轴承承受婷婷久久无码欧美人妻在线观看国产囯内视频，泵和电机之间采用弹性联接；泵吐出口位于安装面基础之上（型式代号为ST的结构形式）熟妇a淫久久成人作爱视频。如有要求成人作爱视频，也可以由电机承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为SD、XT、XD）;用户如有要求少妇大叫又粗又大太爽A片， 也可以设计成可抽式结构形式国产亚洲精品AV片在线观看播放。泵口径在1000mm以上时日韩欧美一区二区三区免费观看精品一本道无码一区日本一道一本，泵转子一般为可抽形式；泵轴向水推力及转子重量一般由电机推力轴承承受婷婷久久无码欧美人妻少妇大叫又粗又大太爽A片成人作爱视频，泵和电机之间采用刚性联接；泵吐出口位于安装面基础之下（型式代号为XD）日本一道一本精品一本道无码一区。如有要求在线观看国产囯内视频少妇大叫又粗又大太爽A片日韩欧美一区二区三区免费观看，也可以由泵承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为XT、SD、ST）日本一道一本。用户如有要求日本一道一本， 也可以设计成不可抽式结构形式最受欢迎无码av排行榜。

6、 泵本體承受軸向水推力及轉子重量時成人作爱视频，泵推力軸承采用稀油潤滑少妇大叫又粗又大太爽A片在线观看国产囯内视频熟妇a淫久久，推力軸承部件帶Pt100測溫元件測軸承溫度或壓力式溫度計測潤滑油溫度最受欢迎无码av排行榜。

7、 泵軸向密封采用填料密封最受欢迎无码av排行榜。

8、 在泵安裝基礎上可以進行葉輪與葉輪室（轉動部分與靜止部分）之間間隙的調整最受欢迎无码av排行榜在线观看国产囯内视频，操作方便熟妇a淫久久精品一本道无码一区少妇大叫又粗又大太爽A片。

9、 從吐出方向往泵看成人作爱视频日韩欧美一区二区三区免费观看国产亚洲精品AV片在线观看播放，電機接線盒與泵外接潤滑水接管位于左側熟妇a淫久久在线观看国产囯内视频婷婷久久无码欧美人妻。也可根據用戶要求成人作爱视频精品一本道无码一区，布置在其它方位成人作爱视频。

Structure feature:

1.   Series LK pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.

2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.   The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pump inundated in the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 90⁰.

4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.

5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  

6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.   The packing seal is adopted for the axial seal of the pump.

9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.

LK型可抽式立式長軸渦輪泵産品主要零部件材質Materials Of Major Parts

介質 Media 零件 Parts	清水 Clear water	海水 Seawater	汙水（含磨料） Sewage（incl.of abrasiv powder）
吐出彎管 Discharge elbow 中間接管（外、內） Intermediate column  (internal & external)	Q235-A	HT200Ni2Cr 0Cr18Ni9 ZG0Cr18Ni12Mo2	Q235-A
導葉、吸入喇叭口 Guide vane, Suction bellmouth	HT200	HT200Ni2Cr ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	HT200、QT500-7 ZG1Cr13Ni1
葉輪 Impeller	ZG1Cr13Ni1 HT200	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	QT500-7 ZG1Cr13Ni1
葉輪室、密封环 Shroud,wearing ring	HT200 ZG2Cr13	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	ZG1Cr13Ni1 QT500-7
主軸 Main shaft	45、2Cr13	2Cr13、0Cr18Ni9 0Cr18Ni12Mo2	45、2Cr13 1Cr18Ni9
軸套 Shaft sleeve	45,2Cr13	2Cr13、0Cr18Ni9 ZG0Cr18Ni12Mo2	2Cr13、1Cr18Ni9
導軸承 Guide bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing

注：根据用户具体使用要求日本一道一本最受欢迎无码av排行榜少妇大叫又粗又大太爽A片，可另选其它适合材质精品一本道无码一区。铸铁材质葉輪只适用于闭式葉輪婷婷久久无码欧美人妻日韩欧美一区二区三区免费观看熟妇a淫久久。

Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.

LK型可抽式立式長軸渦輪泵型谱图

LK型立式长轴渦輪泵外形尺寸图(基本型式XD)